Lateral safety releaseRotating toe piece:- Exactly as with alpine bindings, the rotating toe piece provides a lateral release.- The special, extraordinarily long dynamic range on both sides only releases ski boots after 20 millimeters. - This reduces the number of unintentional releases to a minimum and triggers the release when there is continual lateral force. - This mechanism is supported by a high restoring force. - This feature is extremely important for safety, especially in uneven terrain. .Modern swivel antifriction plate:- Safety above all: The swivel plate with smooth surface enables consistent and friction-free sliding of the boot. - This is particularly important for touring and freeride boots with rubber soles.Frontal safety releaseAutomatic heel reléase:- The binding only releases after a long dynamic travel of 13 mm and consequently only reacts in an emergency. - The perfect fit of the automatic heel releases ensures optimum foothold for all touring and alpine ski boots normed according to DIN ISO.Power transmissionSliding binding bar- In the SAFETY ALUBAR SYSTEM of the Diamir bindings the boot is securely fixed onto the stable linkage of the binding bar between the toe piece and heel mechanism. - The bar slides back and forth in a guide as the ski bends. - This active compensation to the front and back allows the best natural flex and thus always ensures full edge grip along the entire ski.Broad support:- The broad support of the binding via the hinge support in the toe part and the heel support in the back causes a direct transmission of power.Step-in / Step-outEasy step-in / step-out:- Stepping in and out of the binding is just as easy as it is with Alpine ski bindings.Boot compatibility- The Diamir SAFETY ALUBAR SYSTEM is compatible with all touring ski boots with rubber soles and Alpine ski boots according to DIN ISO.Switch between downhill and walk modeComfort Lock:- Switching between uphill and downhill mode using a ski pole is just as easy and quick as changing the walk mode levels.- Similar to the jaw systems of modern safety bindings, the tip of the boot is secured by contact pressure in the toe piece and laterally stabilized, irrespective of the mode. - Therefore, the system is sure to release even in uphill mode.TractionAxion Tech - easy-activation crampons:- Diamir Axion crampons are mounted to the bottom of the binding with just a few easy steps. - Flip it up to climb without engagement as if no crampons were attached. - Simply flip the blade down with a ski pole, as needed, to engage the crampons without stepping out of the binding. - Similarly, flip the blade back up to disengage. - No other crampon is easier to use than the Axion and this is precisely the reason why it contributes substantially to safety.Specifications:- DIN: 4 - 12- Ski width: > 67 mm- Weight: 890 g/pair without brake- Position height: 39 mm from the top edge of the ski- Ski brake, standard equipment: 90 mm