After the success of the Front 12, we expand the family. The Front 9 has specific features for lighter ski mountaineers, with lower releas values (4-9) and softer springs in the toe piece locking mechanism.Guarantee of performance are the presence of our patented system: CAM RELEASE SYSTEM® and ELASTIC RESPONSE SYSTEM®.Ten years ago, we designed our first front brake system with the aim of creating a new standard in terms of functionality and ease of use. This was the first brake system that didn’t need to be locked out during the up-hill section and was always ready to brake the skis, any time that the boots were out of the toe piece.A kind of limit was represented by the need of double activation: once for the front locking lever and once for the brake activation. A new step forward has been done with the FRONT 12 binding and its characteristics have been handed down in the development of the new FRONT 9: the brake is automatically recalled over the ski when the toe piece is set in walking mode, simply pulling the front locking lever of the binding. The same approach leads to recall the brake arms for the downhill mode: pull up the front lever and immediately release it. The brake will be automatically released in case of fall-release or voluntary step out from the binding. The address of this new brake system is clear: pure ski mountaineering, where simplicity of the design, ease of use also in extreme conditions and absolute functional reliability are required for a safe ride on the steepest faces.Specifications:- Materials: Alu 7075, Stainless Steel, POM- Adjustment: 20 mm- Walking modes: Flat, +26.5, + 40 mm- Heel Elastic travel: 10 mm (E.R.S.) - Automatic Front Brake- Ski brake: 91 m