Atk Race Fr14 97 Mm Ski Touring Bindings Green

RAIDER 12 goes deeper! A stronger set of springs allow the release system to achieve the 8 to 14 release values range and the new FREERIDE SPACER included with the binding (optional for the RAIDER 12) provides an incredible torsional stiffness to the boot and transfers the vertical pressure of big jumps and cliffs directly on the ski, still keeping the lateral elasticity to provide a proper lateral release.Specifications:- Materials: Alu Alloys, POM, Stainless Steel- Release: 5-14- Adjustment: 25 mm- Ski brake: 97, 102, 108, 120 mm- Ideal Skis: 95 - 135 mm- Weight: 1000 - 1800 grTechnology:Fast-In System®:- The FAST-IN SYSTEM® consists in a special design of the toe part: the front lever is meant to stop the boot in the perfect position for the step-in.Advantages:- Extremely intuitive and fast step-in with any tech boot.Easy Entry System:- This system is characterized by a new geometry of the toe part elements.Advantages:- Super easy and confident step in on the toe part, with any tech boot available on the market, even in case of worn out soles.Snow pack proof:- A special design of the toe part that avoids any snow/ ice/debris build-up under the hookingAdvantages:- No snow pack under the toe part, even with several up-hill/downhill transitions.- Avoids snow loads on the toe piece, granting a perfect lightness at any moment.UP-Hill Hardness Variator:- This system is an exclusive privilege of the RT, R12 and FR14 families. A multi-position selector is placed in between the front lever and the toe piece base plate. By changing the selector setting, the up-hill mode locking hardness variates by increasing the pressure on the locking mechanism.Advantages:- It compensates the boot toe insert wear and tear during the years.- Provides a proper locking strength for each user (softer for lighter users, harder for strong ones).- Reduces the pressures on the locking mechanism.Cam Release System®:- The king of the ATK® patented systems! The CAM RELEASE SYSTEM® is fitted inside of our touring bindings heels in order to drive the boot step-in and vertical release in case of fall. A special CAM profile is pressed towards the heel pins by a pre-tensioned spring: when the step-in or a fall release occur, the pins are forced to go through the CAM profile which provides a precise resistance to the pin release, depending on the release value set on the binding.Advantages:- Provides the most stable downhill performances on the market with consistent reduction of boot torsion compared to any other tech heel part.- Extremely precise release performance.- Provides the softest heel step in of the industry.- Small dimensions compared to performance and astonishing lightweight.Magneto Heel Flaps:- An ingenious as simple magnet system provides the handling and stabilization of the heel flaps.Advantages:- Extremely light and comfortable heel flaps systemElastic Response System:- A spring is placed in between the base plate of the binding and the adjustment screw. When the ski bents under the effect of a compression or a jump, the 4 mm distance in between boot and heel can be reduced or deleted and the heel part can slide backward and forward under the effect of the spring.Advantages:- Grants the natural ski flex, also in case of big jumps/compressions.- Improves binding release performance when the binding is stressed.- Reduces the pressure on the ski-boot-binding system.